Grinder uachdar làimhe GM150&GM200
Tuairisgeul
| Tuairisgeul | Aonad | Sònrachadh | |
| Nì NO. |
| 121010 | 121015 |
| Modail |
| GM 150 | GM 200 |
| An clàr-obrach |
| ||
| Meud uachdar clàr (fad * leud) | mm | 460*180 | 480*200 |
| Siubhal as motha den bhòrd (fad * leud) | mm | 500*190 | 530*220 |
| Slot-T (àireamh * leud) | mm | 1*14 | 1*14 |
| A 'bleith ceann |
|
| |
| Astar bhon ionad dealgan gu clàr-obrach | mm | 335 | 450 |
| Meud cuibhle bleith (WA46 * 5V) (OD * Leud * ID) | mm | 200*13*31.75 | |
| Astar na cuibhle bleith 50hz | r/mion | 2850 | |
| Astar na cuibhle bleith 60hz | r/mion | 3440 | |
| Inghearach (suas is sìos) cuibhle-làimhe biadhaidh |
|
| |
| per REV.the handwheel | mm | 1.25 | |
| per DIV.the handwheel | mm | 0.005 | |
| Crois (aghaidh is cùlaibh) cuibhle-làimhe biadhaidh |
|
| |
| per REV.the handwheel | mm | 5 | |
| per DIV.the handwheel | mm | 0.02 | |
| An cumhachd motair |
|
| |
| Motor fearsaid | kw | 1.5 | |
| Inneal fuarachaidh | w | 40 | |
| Cruinneas obrach |
|
| |
| Co-shìnteachd uachdar innealta gu uachdar bonn | mm | 300: 0.004 | |
| Garbhachd uachdar | μm | Ra0.32 | |
| Cuideam lom / Cuideam iomlan | kg | 650/750 | 750/850 |
| Meud chuck magnetach maireannach (roghainneil) | mm | 400*150 | 400*200 |
| Meud iomlan (L * W * H) | mm | 1550*1150*1590 | 1680*1140*1760 |
| Meud bogsa pacaidh (L * W * H) | mm | 1000*1150*1760 | 1140*1250*1940 |
Accessories àbhaisteach
| Cuibhle | 1 pc |
| Bàr cothromachaidh cuibhle | 1 pc |
| Seata togail | 4 pcs |
| Spàineadair muncaidh | 1 pc |
| Cuibhle chuck | 1 pc |
| Dreasaiche week | 1 pìos |
| Sgeama ìre agus sgriubha | 1 seata |
| Bogsa innealan agus wrench sònraichte | 1 seata |
| I lampa lasadh | 1 seata |
| Goireasan roghainneil | |
| Magnet maireannach Chuck | 1 seata |
| Neach-cruinneachaidh duslach | 1 seata |
| Seasamh cothromachaidh cuibhle | 1 seata |
| Uidheam cruinneachaidh fuarachaidh agus duslach | 1 seata |
